crown extra lighting co. ltd
crown extra lighting co. ltd Born for industrial safety
Add to Cart
ATEX Approved Led Hazardous Lamps Explosion Proof Led High Bay Lights 80w
Features:
Aluminium alloy Enclosure,high voltage electrostatic powder coated after shot blasted.
High strength toughened glass cover.
Exposed fasteners are of stainless steel with function of high corrosion-proof.
With grids to adjust lighting effect and reduce the glare.
Modular plug structure design, only need disconnect end cover draw out core to change tubes.
For fitting with emergency unit, It will automatically turn to emergency lighting when power circuit failed.
Inside the emergency unit designed with over charging and over discharging protection circuit.
Screw connection type, for easy installation and maintenance.
Power factor can be over 0.95.
Steel conduit or cable wirings.
Application:
1. Typical applications include
2. Oil and gas industrial
3. Chemical petrochemical
4. Pharmaceutical industries
5. Pulp and Paper
6. Waste and sewage treatment
Specification:
| Meet a criterion:G3B3836.1, GB3836.2, GB12476.1, EN60079-0, EN60079-1, EN61241-1 |
| Rated voltage: AC220V |
| Protection grade:IP65 |
| Corrosion-proof grade:WF1,WF2 |
| Inlet Thread: G3/4" |
| European (ATEX) Gas and Dust | II 2G Ex nR e IIC T6 II 2D Ex td T80℃ | ||||||
| For use in | Zone 2 & Zone 21, 22 | ||||||
| Electrical data | |||||||
| Rated voltage | 100-240VAC, 50-60Hz | ||||||
| Power factor | >0.95 | ||||||
| THD | <20% | ||||||
| Luminous characteristics | |||||||
| Power consumption [W] | 20～70 | 80-100 | 100-200 | 220-300 | |||
| Colour rendering [CRI] | 70 | ||||||
| Colour temperature | 6200 | ||||||
| Luminaire efficiency [Lm/W] | 125 | ||||||
| Beam angle | 120° | ||||||
| Mechanical data | |||||||
| Degree of protection | IP65 | ||||||
| Cable entry | G 3/4” | ||||||
| Weight [kg] | 4.8 | 6.4 | 8.8 | / | |||
| Terminal | ≤2.5 mm² | ||||||
| Mounting Styles | Ceiling; Wall Bracket; flange | ||||||
Installation Instructions
Before installation, check voltage, power and other parameters carefully and make installation preparations arrordingly to layout circuit.
1. organize firstly supporting spare parts and accessories
2. do shut off power before installation
3. the loading capacity of the ceilingfixed item where the lamp is installed should be the same as the lamp weight
4. do power-on test to make sure the lamp can be lighted
5. make sure the lamp is installed firmly, turn on the light finally
